This paper presents experimental and numerical results on steam gasification of palm shells in a rotary kiln pilot plant. Both the process performance and gas features have been evaluated varying the steam-biomass ratio (SBR), defined as the mass of steam divided by the mass of palm shells. First, some experimental tests have been performed. Then, the obtained experimental results have been used to verify the consistency of a numerical model developed with the aid of the commercial code ChemCAD®.Numerical results showed that the gas energy content decreases as the SBR increases as well, achieving a maximum value for SBR=0.6 that produced a gas which volumetric composition N2 free is H2=40.4%, CO=24.1%, CO2=21.7%, CH4=12.2%, C2H4=1.7% and in correspondence of which the lower heating value (LHV) is equal to 12MJm-3 in normal conditions. SBR values higher than 0.6 do not produce a further increase of the gas yield, rather require a greater amount of input energy for heating the steam from the room temperature to the process temperature. © 2013 Elsevier Ltd.

Influence of feeding ratio on steam gasification ofpalm shells in a rotary kiln pilot plant. Experimental and numerical investigations

Molino, A.;Donatelli, A.;Iovane, P.
2013-01-01

Abstract

This paper presents experimental and numerical results on steam gasification of palm shells in a rotary kiln pilot plant. Both the process performance and gas features have been evaluated varying the steam-biomass ratio (SBR), defined as the mass of steam divided by the mass of palm shells. First, some experimental tests have been performed. Then, the obtained experimental results have been used to verify the consistency of a numerical model developed with the aid of the commercial code ChemCAD®.Numerical results showed that the gas energy content decreases as the SBR increases as well, achieving a maximum value for SBR=0.6 that produced a gas which volumetric composition N2 free is H2=40.4%, CO=24.1%, CO2=21.7%, CH4=12.2%, C2H4=1.7% and in correspondence of which the lower heating value (LHV) is equal to 12MJm-3 in normal conditions. SBR values higher than 0.6 do not produce a further increase of the gas yield, rather require a greater amount of input energy for heating the steam from the room temperature to the process temperature. © 2013 Elsevier Ltd.
2013
Bioenergy;Biomass;Steam gasification;Palm shells;Rotary kiln;Syngas
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12079/1077
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
social impact