ITER fueling and Edge Localized Mode (ELM) pacing pellets will be created by punching and chambering pellets with a solenoid operated cutter from an extrudate formed by a twin-screw extruder. The cut pellets are then accelerated down a flight tube by a fast pneumatic valve. The impurity pellets are formed in-situ with a pipe gun technique and accelerated down a flight tube with the same pneumatic valve design. © 2015 IEEE.
Selectable flight tube design developments for ITER fueling, ELM pacing, and impurity pellets
Migliori, S.;Frattolillo, A.
2016-01-01
Abstract
ITER fueling and Edge Localized Mode (ELM) pacing pellets will be created by punching and chambering pellets with a solenoid operated cutter from an extrudate formed by a twin-screw extruder. The cut pellets are then accelerated down a flight tube by a fast pneumatic valve. The impurity pellets are formed in-situ with a pipe gun technique and accelerated down a flight tube with the same pneumatic valve design. © 2015 IEEE.File in questo prodotto:
Non ci sono file associati a questo prodotto.
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
