Catalogo Ricerca

Catalogo Ricerca: [12939] Home page macrotipologia

Sfoglia

1 Contributi su Rivista 7200
- 1.1 Articolo in rivista 7188
- 1.2 Recensione in rivista 6
- 1.3 Abstract in rivista 6
- 1.4 Traduzione in rivista 0

2 Contributi in Volume 118

3 Libri 185

4 Contributi in Atti di Convegno 2994
- 4.1 Contributo in Atti di convegno 2960
- 4.2 Abstract in Atti di convegno 17
- 4.3 Poster 17

5 Documenti e prodotti tecnici 2427
- 5.1 Rapporto Tecnico ENEA 320
- 5.2 Documento in Garanzia della Qualità 1700
- 5.3 Documento tecnico 373
- 5.4 Documento di progetto 10
- 5.5 Manufatto 1
- 5.6 Banca dati 3
- 5.7 Software 1
- 5.8 Altro 19

6 Brevetti 8
- 6.1 Brevetto 8

7 Curatele 7
- 7.1 Curatela 7

Prodotti recenti

Pulse Compression in Nondestructive Testing Applications: Reduction of Near Sidelobes Exploiting Reactance Transformation

Pulse compression (PuC) is exploited in several applications, where the impulse response of a linear system must be estimated in a noisy environment. In nondestructive testing (NDT), PuC based on frequency-modulated signals is applied with sensors of different types. The presence of sidelobes in the impulse response retrieved after the PuC is a major drawback of the method as it degrades the quality of the estimation. To limit this effect, the matched filter is usually shaped by means of wind...

Determination of a pre-heating sequence for the DONES Target Assembly

Within the activities promoted by the EUROfusion consortium in support of the design and construction of the DEMO Oriented NEutron Source (DONES), a mock-up of its Target Assembly (TA), based on the configuration with a “bayonet” Back-Plate (BP) and available at ENEA Brasimone labs, is being adopted for the execution of experimental activities aiming at the validation of specific aspects of the target design. Despite the “integral”-TA concept is the current reference, experimental tests conce...

Low-Temperature Growth of ZnO Nanowires from Gravure-Printed ZnO Nanoparticle Seed Layers for Flexible Piezoelectric Devices

Zinc oxide (ZnO) nanowires (NWs) are excellent candidates for the fabrication of energy harvesters, mechanical sensors, and piezotronic and piezophototronic devices. In order to integrate ZnO NWs into flexible devices, low-temperature fabrication methods are required that do not damage the plastic substrate. To date, the deposition of patterned ceramic thin films on flexible substrates is a difficult task to perform under vacuum-free conditions. Printing methods to deposit functional thin fil...

Interaction of poly l-lactide and tungsten disulfide nanotubes studied by in situ x-ray scattering during expansion of PLLA/WS2NT nanocomposite tubes

In situ synchrotron X-ray scattering was used to reveal the transient microstructure of poly(L-lactide) (PLLA)/tungsten disulfide inorganic nanotubes (WS2NTs) nanocomposites. This microstructure is formed during the blow molding process (“tube expansion”) of an extruded polymer tube, an important step in the manufacturing of PLLA-based bioresorbable vascular scaffolds (BVS). A fundamental understanding of how such a microstructure develops during processing is relevant to two unmet needs in P...

Kf evaluation in GFRP composites by thermography

Since the presence of a notch in a mechanical component causes a reduction in the fatigue strength, it is important to know the kf value for a given notch geometry and material. This parameter is fundamental in the fatigue design of aeronautical components that are mainly made of composites. kf is available in the literature for numerous types of notch but only for traditional materials such as metals. This paper presents a new practice, based on thermographic data, for the determination of t...

Scopri

Accesso al fulltext

no fulltext9859
open3006
reserved72
partially open2