The GDG fabrication process developed at CNR-SPIN is a promising method for producing Bi-2212 wires without overpressure processing. In this paper, critical current measurements performed at ENEA on both short and long samples in magnetic fields up to 14 T are compared. The results show no significant difference in J e between short and long (∼1 m) samples, and suggest very good longitudinal uniformity, validating the effectiveness and scalability of the process. In addition, the suitability of Inconel 625 for reaction and test barrels is demonstrated, and the reasons for obtaining lower than expected absolute J e values are discussed.
Evidence for longitudinal homogeneity and No J e Degradation in Bi-2212 wires realized by the GDG Process
Celentano G.;Chiarelli S.;
2019
Abstract
The GDG fabrication process developed at CNR-SPIN is a promising method for producing Bi-2212 wires without overpressure processing. In this paper, critical current measurements performed at ENEA on both short and long samples in magnetic fields up to 14 T are compared. The results show no significant difference in J e between short and long (∼1 m) samples, and suggest very good longitudinal uniformity, validating the effectiveness and scalability of the process. In addition, the suitability of Inconel 625 for reaction and test barrels is demonstrated, and the reasons for obtaining lower than expected absolute J e values are discussed.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
