Sensitized radiation-induced polymerization of indene monomer was achieved at a dose rate of 3 kGy/h. The sensitizer (1,1,2,2-tetrachloroethane or TCE) leads to higher polyindene yields and faster polymerization kinetics with respect to bulk radiation-induced polymerization of indene. The radiation chemical yield Gp was found to increase with the dose in sensitized polymerization of indene following a power law, while an opposite trend was detected in the absence of the sensitizer. The sensitizer enhances the cationic polymerization mechanism in parallel to the free radical mechanism, as shown with both electronic absorption spectroscopy and FT–IR analysis of the polyindenes. Despite the enhancement of the polymer yield and the faster polymerization kinetics offered by the presence of TCE, the molecular weight of the resulting polyindene was found to be rather low. This was true whether the molecular weight was measured by end group analysis using X-ray fluorescence or the glass transition temperature determination with respect to the polyindenes produced with γ radiation without the sensitizer or with a pure cationic mechanism.

Sensitized Radiation-Induced Polymerization of Indene with 1,1,2,2-Tetrachloroethane

Di Sarcina I.;Cemmi A.;
2025-01-01

Abstract

Sensitized radiation-induced polymerization of indene monomer was achieved at a dose rate of 3 kGy/h. The sensitizer (1,1,2,2-tetrachloroethane or TCE) leads to higher polyindene yields and faster polymerization kinetics with respect to bulk radiation-induced polymerization of indene. The radiation chemical yield Gp was found to increase with the dose in sensitized polymerization of indene following a power law, while an opposite trend was detected in the absence of the sensitizer. The sensitizer enhances the cationic polymerization mechanism in parallel to the free radical mechanism, as shown with both electronic absorption spectroscopy and FT–IR analysis of the polyindenes. Despite the enhancement of the polymer yield and the faster polymerization kinetics offered by the presence of TCE, the molecular weight of the resulting polyindene was found to be rather low. This was true whether the molecular weight was measured by end group analysis using X-ray fluorescence or the glass transition temperature determination with respect to the polyindenes produced with γ radiation without the sensitizer or with a pure cationic mechanism.
2025
1,1,2,2-tetrachloroethane
gamma radiation
indene
kinetics
mechanism
molecular weight
polyindene
radiation-induced polymerization
sensitizer
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12079/89227
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 2
social impact